I purchased a couple of the 1W led floodlights from Oznium.com and am about to install them on my T-top. My main intent is to provide some light when fishing at night (tying line, rigging up, etc.). I was about to run a separate wire all the way to the control panel since it looks like I have an open spot.
But I noticed that it would be real easy to tie into the anchor light. Since the anchor light should always be on when stopped and fishing, I thought this might be the way to go. In your opinions, what would be the way to go, a. wired together with anchor light b. wired on a separate circuit, c. wired with anchor light but have a switch to be able to turn the leds or d. other ????
But I noticed that it would be real easy to tie into the anchor light. Since the anchor light should always be on when stopped and fishing, I thought this might be the way to go. In your opinions, what would be the way to go, a. wired together with anchor light b. wired on a separate circuit, c. wired with anchor light but have a switch to be able to turn the leds or d. other ????
Aucun commentaire:
Enregistrer un commentaire